Changing The Network Configuration - SMC Networks 6724L2 - annexe 1 Management Manual

Menu
TFTP Download
Configuration File

Changing the Network Configuration

Use the Network Configuration menu to set the bootup option,
configure the switch's Internet Protocol (IP) parameters, or enable
the onboard Web agent. The screen shown below is described in
the following table.
Parameter
IP Configuration
IP Connectivity Test (Ping)
HTTP Configuration
Network Configuration
=====================
IP Configuration ...
IP Connectivity Test (Ping) ...
HTTP Configuration ...
Use <TAB> or arrow keys to move. <Enter> to select.
Description
Downloads new version of firmware to
update your system (in-band).
Saves or restores configuration data based
on the specified file.
<OK>
Description
Screen used to set the bootup option, or
configure the switch's IP parameters.
Screen used to test IP connectivity to a
specified device.
Screen used to enable the Web agent.
M S
ANAGEMENT
M
ETUP ENU
2-11