Ip Connectivity Test (Ping) - SMC Networks 6724L2 - annexe 1 Management Manual

C I
ONSOLE NTERFACE

IP Connectivity Test (Ping)

Use the IP Connectivity Test to see if another site on the Internet
can be reached. The screen shown below is described in the
following table.
Parameter
IP Address
Test Times
Success/Failure
Note: The switch waits up to 10 seconds for a response to each
ping.
2-14
IP Connectivity Test (Ping)
===========================
IP Address : 10.1.3.22
Test Times : 3
Success
Use <TAB> or arrow keys to move, other keys to make changes.
: 3
[Start]
Description
IP address of the site you want to ping.
The number of ICMP echo requests to send
to the specified site.
Range: 1~1000
The number of times the specified site has
responded (or not) to pinging.
Failure : 0
<CANCEL>