SMC Networks 6724L2 - annexe 1 Management Manual page 121

Parameter Default
GARP Configuration
Join Time 20
Leave Time 60
Leave All 1000
Time
1. The default values for the GARP timers are independent of the media
access method or data rate. These values should not be changed unless
you are experiencing difficulties with GMRP or GVRP registration/
deregistration.
Description
1 Group Address Registration Protocol is used
by GVRP and GMRP to register or deregister
client attributes for client services within a
bridged LAN.
The interval (in centiseconds) between
transmitting requests/queries to participate in
a group.
The interval (in centiseconds) a port waits
before leaving a group.
This time should be set to more than twice the
join time. This ensures that after a Leave or
LeaveAll message has been issued, the
applicants can rejoin before the port actually
leaves the group.
The interval (in centiseconds) between
sending out a LeaveAll query message for
group participants and the port leaving the
group.
This interval should be considerably larger
than the Leave Time to minimize the amount
of traffic generated by nodes rejoining the
group.
D C
EVICE ONTROL
M
ENU
3-37