Layer 2 Menu
The Layer 2 menu contains options for port configuration, port
mirroring, port trunking, static unicast address configuration and
static multicast address configuration. These menu options are
described in the following sections.
Menu
Port
Configuration
Mirror Port
Configuration
Port Trunking
Configuration
Static Unicast
Address Table
Static Multicast
Address Table
Layer 2 Menu
============
Port Configuration ...
Mirror Port Configuration ...
Port Trunking Configuration ...
Static Unicast Address Configuration ...
Static Multicast Address Configuration ...
Use <TAB> or arrow keys to move. <Enter> to select.
Description
Enables any port, enables/disables flow control, and
sets communication mode to auto-negotiation, full
duplex or half duplex.
Sets the source and target ports for mirroring.
Specifies ports to group into aggregate trunks.
Used to manually configure host MAC addresses in
the unicast table.
Used to manually configure host MAC addresses in
the multicast table.
D
<OK>
C
EVICE
ONTROL
M
ENU
2-27