SMC Networks 6724L2 - annexe 1 Management Manual page 107

Parameter Default
Jack Type
Configuring Port Settings – To configure a port, press the edit
icon ( ) for the required entry, make any necessary changes, and
press Save. Press Reset to restore the latest configuration settings.
Description
For the Gigabit modules the options for flow
control are set out below:
Switch Link Partner*
SendOnly Rcv/BothWay Switch can only
BothWay Rcv/BothWay Both switch and link
*Another SMC6724L2 or SMC6724L3 switch.
Shows the jack type for each port.
Ports 1-24: RJ-45
Ports 25-26: SC, RJ-45
D C
EVICE ONTROL
Flow Control
send pause frames,
link partner can only
receive pause frames.
partner can send and
receive pause frames.
M
ENU
3-23