Layer 2 Menu; Configuring Port Parameters - SMC Networks 6724L2 - annexe 1 Management Manual

Layer 2 Menu

The Layer 2 menu contains options for port configuration, port
mirroring, and port trunking. These menu options are described in
the following sections.
Menu
Port
Configuration
Mirror Port
Configuration
Port Trunking
Configuration
Static Unicast
Address Table
Static Multicast
Address Table

Configuring Port Parameters

Use the Port Configuration menu to display or set communication
parameters for any port or module on the switch, including
administrative status, auto-negotiation, default communication
speed and duplex mode, as well as flow control in use.
. . .
Description
Enables any port, enables/disables flow control, and
sets communication mode to auto-negotiation, full
duplex or half duplex.
Sets the source and target ports for mirroring.
Specifies ports to group into aggregate trunks.
Used to manually configure host MAC addresses in
the unicast table.
Used to manually configure host MAC addresses in
the multicast table.
D C
EVICE ONTROL
M
ENU
3-21