Universal Robots PolyScope X UR16e User Manual page 93

Part I Hardware Installation Manual
Environment
1.13. Applied Standards
User Manual
Attestation of Conformity no. 119-29301-A1
Universal Robots A/S Assessment holder
Denmark 5260 Odense S Energivej 25
UR16e Robot Arm Product identification
FORCE Technology test reports Controller CB, 3.2 UR10/5 G5
Environmental tests of UR16e, project no.: 119-24069, report no.: 119-24069-1 dated 29 April 2019
Other technical documentation
Conclusion
stated by the client. report listed above. All tests were carried out as specified in the relevant specifications including special test criteria's The robot arms have been tested according to the standards listed below. The test results are given in the Force
IEC 60068-2-2:2007 IEC 60068-2-1:2007 Test Be; Dry heat +35 °C, 16 h Test Ae; Cold -5 °C, 16 h
EN 60068-2-64:2008 IEC 60068-2-2:2007 10-50 Hz 0.00042 g²/Hz, 50 – 100 Hz: -12 dB/octave, Test Fh; Vibration (random), 5 – 10 Hz: +12 dB/octave, Test Be; Dry heat +50 °C, 16 h
EN 60068-2-27:2008 IEC 60529:2013 IP5X Test Ea; Shock, 11 g, 11 ms, 6 x 9 shocks 0.15 grms, 3 x 30 min
IEC 60529:2013 IPX4
Signature
FORCE Technology Venlighedsvej 4 FORCE Technology Norway AS Nye Vakås vei 32 FORCE Technology Sweden AB Tallmätargatan 7 FORCE Technology Park Allé 345
Tel.+45 43 25 14 00 2970 Hørsholm Fax 1395 Hvalstad, Norway info@forcetechnology.no +47 64 00 35 01 +47 64 00 35 00 info@forcetechnology.se +46 (0)21-490 3001 +46 (0)21-490 3000 72134 Västerås, Sweden www.forcetechnology.com info@forcetechnology.dk 2605 Brøndby, Denmark +45 43 25 00 10 +45 43 25 00 00
93 UR16e PolyScope X