Garmin INSTINCT 3 SOLAR Owner's Manual page 97

Changing the Spring Bar Bands
You can replace the bands with new Instinct 3 watch bands or compatible QuickFit
about compatible watch bands and sizes, go to your Instinct 3 watch product page at buy.garmin.com.
1 Push in the watch pin, and remove the band from the watch.
2 Select an option:
• To install Instinct 3 bands, align the new band with the holes on the watch, push in the watch pin, and
press the band into place.
NOTE: Make sure the band is secure. The watch pin should align with the holes on the watch.
• To install compatible QuickFit bands, install a compatible watch pin on the watch, and press the new band
into place.
NOTE: Make sure the band is secure. The latch should close over the watch pin.
3 Repeat the steps to change the other band.
Device Information
® bands. For information
89