Garmin INSTINCT 3 SOLAR Owner's Manual page 38

Satellite Settings
You can change the satellite settings to customize the satellite systems used for each activity. For more
information about satellite systems, go to garmin.com/aboutGPS.
Hold MENU, select Activities & Apps, select an activity, select the activity settings, and select Satellites.
NOTE: This feature is not available for all activities.
Off: Disables satellite systems for the activity.
Use Default: Enables the watch to use the default system setting for satellites
GPS Only: Enables the GPS satellite system.
All Systems: Enables multiple satellite systems. Using multiple satellite systems together offers increased
performance in challenging environments and faster position acquisition than using GPS only. However,
using multiple systems can reduce battery life more quickly than using GPS only.
All + Multi-Band: Enables multiple satellite systems on multiple frequency bands. Multi-band systems use
multiple frequency bands and allow for more consistent track logs, improved positioning, improved multi-
path errors, and fewer atmospheric errors when using the watch in challenging environments.
Auto Select: Enables the watch to use SatIQ
based on your environment. The Auto Select setting offers the best positioning accuracy while still
prioritizing battery life.
UltraTrac: Records track points and sensor data less frequently. Enabling the UltraTrac feature increases
battery life but decreases the quality of recorded activities. You should use the UltraTrac feature for activities
that demand longer battery life and for which frequent sensor data updates are less important.
Setting an Alarm
You can set multiple alarms. You can set each alarm to sound once or to repeat regularly.
1 From any screen, hold SET.
2 Select Alarms.
3 Select an option:
• To set and save an alarm for the first time, enter the alarm time.
• To set and save additional alarms, select Add Alarm, and enter the alarm time.
Editing an Alarm
1 From any screen, hold SET.
2 Select Alarms > Edit.
3 Select an alarm.
4 Select an option:
• To turn on or off the alarm, select Status.
• To change the alarm time, select Time.
• To set the alarm to repeat regularly, select Repeat, and select when the alarm should repeat.
• To select the type of alarm notification, select Sound and Vibe.
• To turn on or off the backlight with the alarm, select Backlight.
• To select a description for the alarm, select Label.
• To delete the alarm, select Delete.
30
technology to dynamically select the best multi-band system
™
Clocks
(System Settings, page 84).
Clocks