Page 2
When the bracket and mounts are properly installed, you can move your Forerunner quickly from your handlebars to your wrist. note: For more information, see the Forerunner 310XT Owner’s Manual. Quick Release Instructions...
Page 3
Release Bracket 1. Verify that the arrow on the back of the quick release bracket is pointing up and your Garmin device is facing up. 2. Use the spring pin tool to install the bottom spring pin back into the Forerunner.
Page 4
Mount You can install the bike mount on any part of your handlebars or on the stem. Ensure that the Garmin unit is facing up for the best GPS reception. 1. Place the bike mount on your handlebars or stem.
Page 5
bike mount center screw cable ties handlebar For vertical bars: remove the center screw, turn the front plate 90 degrees, and replace the center screw. Now you can attach the Forerunner to the bike mount. 3. Align the quick release bracket with the front plate of the bike mount so that the unit is vertical.
Page 6
Step 4: Move the Forerunner From the Bike Mount to the Wrist Mount 1. Turn the Forerunner 90 degrees counterclockwise to separate it from the bike mount. 2. Align the quick release bracket with the front of the wrist mount so that the unit is horizontal.
Limited Warranty Garmin’s standard limited waranty applies to this accessory. For more information, see the Important Safety and Product Information in the Garmin product box. Quick Release Instructions...