Table 6-1 Remote Node Profile Menu Fields For Leased Lines - ZyXEL Communications PRESTIGE 1400 User Manual

Wan router with integrated ethernet switch
Hide thumbs Also See for PRESTIGE 1400:
Table of Contents

Advertisement

Prestige 1400 WAN Router with Integrated Ethernet Switch
The following table contains the instructions on how to configure the Remote Node Profile Menu for leased lines.

Table 6-1 Remote Node Profile Menu Fields for Leased Lines

FIELD
Rem Node Name
Active
Outgoing:
My Login Name
Edit PPP Options
Rem IP Addr
Edit IP
Telco Option:
Edit Frame Relay Options
Session Options:
Input Filter Sets, Output
6-2
This is a required field. Enter a descriptive name
for the remote node, e.g., myISP. This field can be
up to eight characters.
Press [SPACE BAR] to toggle between Yes and
No.
Enter the login name for your Prestige when it
calls this remote node.
My Password
Enter the password for your Prestige when it calls
this remote node.
Authen
This field sets the authentication protocol used for
outgoing calls. PAP/CHAP
Your Prestige supports both Password
Authentication Protocol (PAP) and Challenge
Handshake Authentication Protocol (CHAP).
CHAP is more secure than PAP because the
password is not sent in clear text.
Options for this field are:
CHAP/PAP - Your Prestige will accept either
CHAP or PAP when requested by this remote
node.
CHAP - accept CHAP only.
PAP - accept PAP only.
To edit the PPP options for this remote node,
move the cursor to this field, press the [SPACE
BAR] to select Yes and press [ENTER]. This will
bring you to Menu 11.2 - Remote Node PPP
Options. For more information on configuring
PPP options, see the section Editing PPP
Options.
This is a required field. Enter the IP address of the
remote gateway.
To edit the IP parameters, select Yes and press
[ENTER]. This will bring you to Menu 11.3 -
Remote Node Network Layer Options. For more
information on this screen, refer to the section
Remote Node TCP/IP Configuration.
Please see the WAN Port Setup chapter for a full
discussion of this feature.
In these fields, enter the filter set(s) you wish to
apply to the incoming and outgoing traffic between
this remote node and your Prestige. You can
DESCRIPTION
OPTIONS
Yes/No
CHAP/PAP
(default)
CHAP
PAP
Yes
Yes
Remote Node Configuration

Advertisement

Table of Contents
loading

Table of Contents