Figure 4-2 Menu 11.1 Remote Node Profile; Table 4-1 Remote Node Profile Menu Fields - ZyXEL Communications Prestige 642 User Manual

Menu 11.1 - Remote Node Profile
Rem Node Name= nodename
Active= Yes
Encapsulation= PPP
Multiplexing= VC-based
Incoming:
Rem Login=
Rem Password=********
Outgoing:
My Login= oscar
My Password= ********
Authen= CHAP/PAP
Enter here to CONFIRM or ESC to CANCEL:
Field
Rem Node Name
Active
PPP refers to RFC 2364, "PPP Encapsulation over ATM
Encapsulation=
Adaptation Layer 5". If RFC 1483 ("Multiprotocol Encapsulation
over ATM Adaptation Layer 5") or ENET ENCAP are selected,
then the Rem Login, Rem Password, My Login, My Password,
Edit PPP Options and Authen fields will not be applicable (N/A).
Moreover, ENET ENCAP encapsulation does not apply for IPX
routing.
Multiplexing=
Incoming:
Rem
Login
Name
Incoming: Rem
Password
Remote Node Configuration
Route= IP
Bridge= No
Edit PPP Options= No
Rem IP Addr= 0.0.0.0
Edit IP/IPX/Bridge= No
Session Options:
Edit Filter Sets= No

Figure 4-2 Menu 11.1 Remote Node Profile

Table 4-1 Remote Node Profile Menu Fields

Description
This is a required field [?]. Enter a descriptive name for the
remote node, for example, Corp. This field can be up to
eight characters. This name must be unique from any other
remote node name.
Press the spacebar to toggle between Yes and No. Inactive
nodes are displayed with a minus sign (-) at the beginning of
the name in Menu 11.
Press the spacebar to the select the multiplexing method.
Enter the login name that this remote node will use when it
calls your Prestige.
The login name in this field combined with the Rem Node
Password will be used to authenticate this node.
Enter the password used when this remote node calls your
Prestige.
Prestige 642 ADSL Internet Access Router
Enter a unique
name of less than
8 characters for
.
the remote name
Enter the IP
address of the
remote gateway
here.
Options
Yes/No
PPP,
RFC 1483
or ENET
ENCAP
VC-based
LLC-based
4-3