Wan Port Setup; Configuring The Wan Port For Ppp Over Hdlc; Figure 4-1 Menu 2 - Wan Port Setup; Table 4-1 Wan Setup Menu Fields - ZyXEL Communications PRESTIGE 1400 User Manual

Select option 2 from the main menu by typing 2 at the menu selection number prompt to display the next screen.
FIELD
Clock Source
Port Speed
Edit Frame Relay
Setup
4.1

Configuring The WAN Port For PPP over HDLC

The following diagram depicts the configuration scenario for running PPP over HDLC (High-level Data Link
Control).

WAN Port Setup

This section describes setting up your WAN port including Frame Relay.
Menu 2 - WAN Port Setup
Clock Source = External
Port Speed = N/A
Edit Frame Relay Setup= No
Press Enter to Confirm or ESC to Cancel:

Figure 4-1 Menu 2 - WAN Port Setup

Table 4-1 WAN Setup Menu Fields

The device connected to the WAN port controls timing. The
P1400 currently only supports an external clock source.
Set by External Device
To configure the WAN port for frame relay move the cursor
to the Edit Frame Relay Setup field, press the
[SPACEBAR] once to display Yes and then press
[ENTER]. This takes you to Menu 2.1.2 - Frame Relay
Setup shown ahead.
Prestige 1400 WAN Router with Integrated Ethernet Switch
WAN Port Setup
Change the default option (No) to
Yes if you wish to configure the
WAN port for frame relay.
DESCRIPTION
Chapter 4
EXAMPLE
External
N/A
No
4-1