Hardware Installation & Initial Setup; Unpacking Your Prestige; Additional Installation Requirements; Front Panel - ZyXEL Communications PRESTIGE 1400 User Manual

Hardware Installation & Initial Setup
This chapter shows you how to install the Prestige hardware and perform initial setup using the SMT.
3.1

Unpacking Your Prestige

Before installing, check if all the components of the Prestige package are included. Observe the safety rules
carefully when you are making the connections.
3.2

Additional Installation Requirements

In addition to the contents of the package, you need additional hardware and software components before you can
install and use your Prestige. These components include:
A computer with Ethernet 10Base-T or 100Base-TX NIC (Network Interface Card)
WAN service provided by a local phone company
A computer with terminal emulation software configured to the following parameters:
"
VT100 terminal emulation
"
9600 bps
"
No parity, 8 data bits, 1 stop bit
"
No flow control
3.3

Front Panel

The following figure shows, as an example, the Prestige connected to a PES-100 phoneline network switch, a
computer via null modem for initial configuration, a local application server and two possible WAN connections.
Hardware Installation & Initial Setup
Prestige 1400 WAN Router with Integrated Ethernet Switch
Chapter 3
3-1