Figure 4-2 Menu 11.1 - Remote Node Profile; Table 4-1 Remote Node Profile Menu Fields - ZyXEL Communications Prestige 650H-17 User Manual

Nailed-Up Connection (PPPoA)
A nailed-up connection is a dial-up line where the connection is always up regardless of traffic demand.
The Prestige does two things when you specify a nailed-up connection. The first is that idle timeout is
disabled. The second is that the Prestige will try to bring up the connection when turned on and whenever
the connection is down. A nailed-up connection can be very expensive for obvious reasons.
Do not specify a nailed-up connection unless your telephone company offers flat-rate service or you need a
constant connection and the cost is of no concern
Rem Node Name= myISP
Active= Yes
Encapsulation= PPP
Multiplexing= LLC-based
Service Name= N/A
Incoming:
Rem Login=
Rem Password= ********
Outgoing:
My Login=
My Password= ********
Authen= CHAP/PAP
In Menu 11.1 – Remote Node Profile, fill in the fields as described in the following table.
FIELD
Rem Node Name
Active
Remote Node Configuration
Menu 11.1 - Remote Node Profile
Press ENTER to Confirm or ESC to Cancel:
Figure 4-2 Menu 11.1 – Remote Node Profile

Table 4-1 Remote Node Profile Menu Fields

Type a unique, descriptive name of up to eight
characters for this node.
Press [SPACE BAR] and then [ENTER] to select Yes to
activate or No to deactivate this node. Inactive nodes
are displayed with a minus sign "–" in SMT menu 11.
Prestige 650H-17 ADSL Router
Route= IP
Bridge= No
Edit IP/Bridge= No
Edit ATM Options= No
Telco Option:
Allocated Budget(min)= 0
Period (hr)= 0
Schedule Sets= N/A
Nailed-Up Connection= N/A
Session Options:
Edit Filter Sets= No
Idle Timeout (sec)= N/A
DESCRIPTION EXAMPLE
myISP
Yes
4-3