13.3.2 Syslog And Accounting; Figure 13-8 Examples Of Error And Information Messages; Figure 13-9 Syslog And Accounting; Table 13-4 System Maintenance Menu Syslog Parameters - ZyXEL Communications PRESTIGE 1400 User Manual

Prestige 1400 WAN Router with Integrated Ethernet Switch
Examples of typical error and information messages are presented in the figure below.
0 1073808110 PINI
1 1073808353 PP09
2 1073808416 PINI
3 1073808416 PINI
4 1073808564 PP09
5 1073808799 PINI
6 1073808831 PP09
7 1073808864 PINI
8 1073808927 PP0c -WARN
9 1073809498 PINI
10 1073809498 PINI
11 1073809498 PINI
12 1073809498 PINI
13 1073809498 PINI
14 1073809498 PINI
15 1073809498 PINI
16 1073809498 PINI
Clear Error Log (y/n):

13.3.2 Syslog And Accounting

The Prestige uses the UNIX syslog facility to log system messages to a syslog server. Syslog and accounting can be
configured in Menu 24.3.2 - System Maintenance - Syslog and Accounting, as shown next.
Press ENTER to Confirm or ESC to Cancel:
Press Space Bar to Toggle.
You need to configure the following three parameters described in the table below to activate syslog.
PARAMETER
Active
Syslog IP
Address
Log Facility
Note: If you want to use Syslog on a Windows 95,98 or NT system, you must install a Syslog client.
13-6
INFO SMT Session Begin
ERROR netMakeChannDial: err=-3001 rn_p=68fb0c
ERROR Last errorlog repeat 1 Times
INFO SMT Session End
ERROR netMakeChannDial: err=-3001 rn_p=68fb0c
INFO SMT Session Begin
WARN rt_drop: target = c0a80101 nmask=32 code=05
INFO SMT Session End
SNMP TRAP 1: warm start
INFO IDSL port configuration start
INFO Board 0 Channel 0 config ok
INFO Board 0 Channel 1 config ok
INFO Board 0 Channel 2 config ok
INFO Board 0 Channel 3 config ok
INFO Board 0 Channel 4 config ok
INFO Board 0 Channel 5 config ok
INFO Board 0 Channel 6 config ok

Figure 13-8 Examples of Error and Information Messages

Menu 24.3.2 -- System Maintenance - Syslog and Accounting
Syslog:
Active= No
Syslog IP Address= ?
Log Facility= Local 1

Figure 13-9 Syslog and Accounting

Table 13-4 System Maintenance Menu Syslog Parameters

Press [SPACE BAR] to turn on or off syslog.
Enter the IP Address of your syslog server.
Press [SPACE BAR] to toggle between the 7 different
Local options. The log facility allows you to log the
message in different files in the server. Please refer to
your UNIX manual for more detail.
DESCRIPTION
System Information and Maintenance