Figure 8-6 Sua Address Mapping Rules; Table 8-3 Sua Address Mapping Rules - ZyXEL Communications PRESTIGE 1400 User Manual

Prestige 1400 WAN Router with Integrated Ethernet Switch
Set Name= SUA
Idx Local Start IP
--- ---------------
1. 0.0.0.0
2.
3.
4.
5.
6.
7.
8.
9.
10.
The following table explains the fields in this screen.
Please note that the fields in this menu are read-only. Fields are configured in Menu 15.1.1.1
FIELD
Set Name
Idx
Local Start IP
Local End IP
Global Start
IP
Global End IP
Type
For all Local and Global IPs, the End IP address must be numerically greater than the IP Start address.
Enter 1 to in Menu 15.1 bring up the following menu. Note that, this screen is not read only, so there are extra
Action and Select Rule fields. Note also that the [?] in the Set Name field means that this is a required field and
you must enter a name for the set.
8-6
Menu 15.1.255 - Address Mapping Rules
Local End IP
---------------
255.255.255.255
Press ENTER to Confirm or ESC to Cancel:

Figure 8-6 SUA Address Mapping Rules

(described later) and the values are displayed here.

Table 8-3 SUA Address Mapping Rules

DESCRIPTION
This is the name of the set you selected in Menu
15.1 or enter the name of a new set you want to
create.
This is the index or rule number.
Local Start IP is the starting local IP address (ILA)
(see Figure 8-1). Local End IP is the ending local IP
address (ILA). If the rule is for all local IPs, then the
Start IP is 0.0.0.0 and the End IP is 255.255.255.255.
This is the starting global IP address (IGA). If you
have a dynamic IP, enter 0.0.0.0 as the Global Start
IP.
This is the ending global IP address (IGA).
These are the mapping types discussed above (see
Table 8-1). Type Server allows you to specify a
server of a given service behind NAT. See section
8.4.3 below for some examples.
Global Start IP Global End IP
--------------- ---------------
0.0.0.0
0.0.0.0
Type
------
M-1
Server
OPTIONS/EXAMPLE
SUA
1
0.0.0.0
255.255.255.255
0.0.0.0
N/A
Server
NAT