Table 4-1 Remote Node Profile Menu Fields - ZyXEL Communications Prestige 642 User Manual

Table 4-1
Field
Rem Node Name
Active
Encapsulation=
Multiplexing=
Incoming: Rem
Login
Name
Incoming: Rem
Password
Outgoing: My Login
Outgoing: My
Password
Outgoing: Authen
Remote Node Configuration
Remote Node Profile Menu Fields
Description
This is a required field [?]. Enter a descriptive name for the
remote node, for example, Corp. This field can be up to
eight characters. This name must be unique from any other
remote node name.
Press the spacebar to toggle between Yes and No. Inactive
nodes are displayed with a minus sign (-) at the beginning of
the name in Menu 11.
PPPoE refers to RFC 2516 and PPP refers to RFC 2364,
"PPP Encapsulation over ATM Adaptation Layer 5". If RFC
1483 ("Multiprotocol Encapsulation over ATM Adaptation
Layer 5") or ENET ENCAP are selected, then the Rem
Login, Rem Password, My Login, My Password, Edit PPP
Options and Authen fields will not be applicable (N/A).
Moreover, ENET ENCAP encapsulation does not apply for
IPX routing.
Press the spacebar to the select the multiplexing method.
Enter the login name that this remote node will use when it
calls your Prestige.
The login name in this field combined with the Rem Node
Password will be used to authenticate this node.
Enter the password used when this remote node calls your
Prestige.
Enter the login name for your Prestige when it calls this
remote node. If you are using PPPoE encapsulation, then
this field must be of the form
identifies your ISP. Some ISPs append this field to the
Service Name field below (e.g.,
PPPoE server.
Enter the password for your Prestige when it calls this
remote node.
This field sets the authentication protocol used for outgoing
calls.
Options for this field are:
Prestige 642 ADSL Internet Access Router
user@domain
where domain
jim@poellc
) to access the
Options
Yes/No
PPPoE,
PPP,
RFC 1483
or ENET
ENCAP
VC-based
LLC-based
4-3