Command Interpreter Mode; Figure 13-11 Boot Module Commands - ZyXEL Communications PRESTIGE 1400 User Manual

Prestige 1400 WAN Router with Integrated Ethernet Switch
Prestige boot module commands are shown below. For ATBAx, x denotes the number preceding the colon to give
the speed following the colon in the list of numbers that follows; e.g. ATBA3 will give a baud of 9.6 Kbps. ATSE
displays the seed that is used to generate a password to turn on the debug flag in the firmware. The ATSH
command shows product related information such as boot module version, vendor name, product model, RAS code
revision, etc.
======= Debug Command Listing =======
athe
======= Debug Command Listing =======
AT
ATHE
ATBAx
4:57.6k 5:115.2k
ATENx(,y)
ATSE
ATTI(h,m,s)
current time
ATDA(y,m,d)
current date
ATDS
ATDT
ATDUx,y
length y
ATRBx
ATRBx
ATRWx
ATRLx
ATGOx
ATGR
ATGT
ATRTw,x,y(,z) RAM Test level w, from address x to y (z
iterations)
ATCB
ATSH
ATDOx,y
via XMODEM
ATTD
< press any key to continue >
ATUR
ATUR3
ATLC
ATLOa,b,c,d
ATGM
ATGB
ATUM
ATUB
ATSW
13.6

Command Interpreter Mode

This option allows you to enter the command line interpreter mode. The list of valid commands can be found by
typing help or ? at the command prompt. To exit the CI mode and return to the menu mode, type exit.
For more detailed information, refer to the list of CI commands appended at the end of this guide, check the ZyXEL
Web site.
13-8
just answer OK
print help
change baudrate. 1:38.4k, 2:19.2k, 3:9.6k
set BootExtension Debug Flag (y=password)
show the seed of password generator
change system time to hour:min:sec or show
change system date to year/month/day or show
dump RAS stack
dump Boot Module Common Area
dump memory contents from address x for
display the 8-bit value of address x
display the 8-bit value of address x
display the 16-bit value of address x
display the 32-bit value of address x
run program at addr x or boot ZyNOS
boot ZyNOS
run Hardware Test Program
copy from FLASH ROM to working buffer
dump manufacturer related data in ROM
download from address x for length y to PC
download configuration to PC via XMODEM
upload RAS code to flash ROM
upload RAS configuration file
upload RAS configuration file
Int/Trap Log Cmd
boot ZyNOS in main block
boot ZyNOS in backup block
upload RAS code to main block
upload RAS code to backup block
switch main block and backup block

Figure 13-11 Boot Module Commands

System Information and Maintenance