Prestige 1400 WAN Router with Integrated Ethernet Switch
FIELD
Encapsulation
Compression
Once you have completed filling in Menu 11.2 - Remote Node PPP Options, press
[ENTER] at the message "Press ENTER to Confirm..." to save your configuration, or press
[ESC] at any time to cancel.
6.4
Edit IP Parameters
Move the cursor to the Edit IP field in Menu 11.1 - Remote Node Profile, then press [SPACE BAR] to choose
Yes, and press [ENTER] to edit Menu 11.3 - Network Layer Options.
Enter here to CONFIRM or ESC to CANCEL
Figure 6-4 Menu 11.3- Remote Node Network Layer Options
6-4
Table 6-2 Remote Node PPP Options Menu Fields
DESCRIPTION
Select the vendor-specific encapsulation for the link.
The default is Standard PPP. Select Cisco PPP only
when the remote gateway is a Cisco machine.
Standard PPP - Standard PPP encapsulation will be
used.
CISCO PPP - Cisco PPP encapsulation will be used.
Turn on/off Stac data compression. The default for this
field is Off.
Menu 11.3 Remote Node Network Layer Options
Rem IP Addr= 0.0.0.0
Rem Subnet Mask= 0.0.0.0
My WAN Addr= 0.0.0.0
Network Address Translation= SUA Only
Address Mapping Set= N/A
Metric= 2
Private= No
RIP Direction= None
Version= RIP-1
Multicast= IGMP-v2
IP Policies=
OPTION
Standard PPP
CISCO PPP
On/Off
(Default = Off)
Remote Node Configuration