Figure 15-7 Ip Routing Policy Example; Figure 15-8 Ip Policy Routing - ZyXEL Communications PRESTIGE 1400 User Manual

Step 1. Create a routing policy set in Menu 25.
Step 2. Create a rule for this set in Menu 25.1 - IP Routing Policy as shown next.
Policy Set Name= set1
Active= Yes
Criteria:
IP Protocol
Type of Service= Don't Care
Precedence
Source:
addr start= 192.168.1.2
port start= 0
Destination:
addr start= 0.0.0.0
port start= 80
Action= Matched
Gateway addr
Type of Service= No Change
Precedence
Press Space Bar to Toggle.
Step 3. Check Menu 25.1 - IP Routing Policy Setup to see if the rule is added correctly.
Create another policy set in Menu 25.
Step 4.
Create a rule this set in Menu 25.2 to route packets from any host (IP=0.0.0.0 means any host) with
Step 5.
protocol TCP and port FTP access through another gateway (192.168.1.100).
Policy Set Name= set2
Active= Yes
Criteria:
IP Protocol
Type of Service= Don't Care
Precedence
Source:
addr start= 0.0.0.0
port start= 0
Destination:
addr start= 0.0.0.0
port start= 20
Action= Matched
Gateway addr
Type of Service= No Change
Precedence
Press Space Bar to Toggle.
Step 6. Check Menu 25.1 - IP Routing Policy Setup to see if the rule is added correctly.
Step 7. Apply both policy sets in Menu 3.2 as shown next.
15-7
Menu 25.1 - IP Routing Policy
= 6
= Don't Care
= 192.168.1.1
= No Change
Press ENTER to Confirm or ESC to Cancel:

Figure 15-7 IP Routing Policy Example

Menu 25.2 - IP Routing Policy
= 6
= Don't Care
=192.168.1.100
= No Change
Press ENTER to Confirm or ESC to Cancel:

Figure 15-8 IP Policy Routing

Prestige 1400 WAN Router with Integrated Ethernet Switch
Packet length= 10
Len Comp= N/A
end= 192.168.1.222
end= N/A
end= N/A
end= 80
Log= No
Packet length= 10
Len Comp= N/A
end= N/A
end= N/A
end= N/A
end= 21
Log= No
IP Policy Routing