Table of Contents
Advertisement
Table 5-5 contains instructions on how to configure your Prestige for Internet access.
FIELD
ISP's Name
Internet Access
Interface=
Ethernet:
Local IP Addr This is the WAN IP address of the Prestige.
Subnet Mask Enter the corresponding subnet mask given to you.
Gateway IP Addr This is the default ISP gateway to the Internet.
FlexWAN:
My Login Name Enter the login name assigned to you.
My Password Enter the password associated with the login name above.
Internet Access
Menu 4 - Internet Access Setup
ISP's Name= Hinet
Internet Access Interface= FlexWAN
Ethernet:
Local IP Addr= N/A
Subnet Mask= N/A
Gateway IP Addr= N/A
FlexWAN:
My Login=
My Password= ********
Edit Frame Relay Options= No
Network Address Translation= None
My WAN Addr= N/A
Address Mapping Set= N/A
Press ENTER to Confirm or ESC to Cancel:
Figure 5-2 Menu 4 - Internet Access Setup
Table 5-5 Internet Access Setup Menu Fields
Enter the name of your Internet Service Provider. (This
information is for identification purposes only.)
Press the [SPACE BAR] to select either Ethernet (connection
via broadband modem to a Prestige Ethernet port) or
FlexWAN (connection via WAN device, e.g., CSU/DSU to the
Prestige WAN port). You can only have one interface active at
any one time.
To change the Internet Access Interface field you need to:
1.
Go to Menu 4 and delete the ISP's name field.
2.
Then press [ENTER] at the message "Press ENTER to
Confirm...", i.e., delete the profile.
3.
Now reenter Menu 4 and select a new Internet access
interface.
This information is given to you by your ISP.
This information is given to you by your ISP.
Note that this login name/password pair is only for your
Prestige to connect to the ISP's gateway. For TCP/IP
applications, e.g., FTP, you will need a separate login name
and password for each server.
Prestige 1400 WAN Router with Integrated Ethernet Switch
DESCRIPTION
OPTION/
EXAMPLE
myISP
FlexWAN
(required)
(required)
5-5
Advertisement
Table of Contents
Troubleshooting
