Applying A Filter; Ethernet Traffic; Figure 9-9 Filtering Ethernet Traffic - ZyXEL Communications PRESTIGE 1400 User Manual

FIELD
Action
Matched
Action Not
Matched
Once you have completed filling in Menu 21.1.1 - Device Filter Rule, press [ENTER]
at the message "Press ENTER to Confirm" to save your configuration, or press [ESC]
to cancel. This data will now be displayed on Menu 21.1 - Filter Rules Summary.
9.6

Applying a Filter

This section shows you where to apply the filter(s) after you design it (them).
9.6.1

Ethernet traffic

You seldom need to filter Ethernet traffic; however, the filter sets may be useful to block certain packets, reducing
traffic and preventing security breaches. Go to Menu 3.1 - General Ethernet Setup (shown next) and enter the
number(s) of the filter set(s) that you want to apply as appropriate. You can choose up to four filter sets (from
twelve) by entering their numbers separated by commas, e.g., 3, 4, 6, 11.
Press ENTER to Confirm or ESC to Cancel:
Filter Configuration
Prestige 1400 WAN Router with Integrated Ethernet Switch
DESCRIPTION
Both - All packets will be logged.
Select the action for a matching packet.
Select the action for a packet not matching the rule.
Menu 3.1 - General Ethernet Setup
Input Filter Sets:
protocol filters=
device filters=
Output Filter Sets:
protocol filters=
device filters=

Figure 9-9 Filtering Ethernet Traffic

OPTION
Both
Check Next
Rule
Forward
Drop
Check Next
Rule
Forward
Drop
9-11