Configuring Nat; Address Mapping Sets And Nat Server Sets; Figure 8-4 Menu 15 Nat Setup; Figure 8-5 Menu 15.1 Address Mapping Sets - ZyXEL Communications PRESTIGE 1400 User Manual

Address Mapping
Set
8.2.2

Configuring NAT

To configure NAT, enter 15 from the main menu to bring up the following screen.
Enter Menu Selection Number:
8.2.3

Address Mapping Sets and NAT Server Sets:

Use the Address Mapping Sets menus and submenus to create the mapping table for translation. Each remote node
must specify which NAT Address Mapping Set to use. You can only configure set 1 to 4, which supports all
mapping types as outlined in Table 8-1. Set 255 is used for SUA. When you select SUA Only, the SMT will use
the pre-configured Set 255 (read only) - see section 8.1.5.
Enter 1 to bring up Menu 15.1 - Address Mapping Sets.
Let's look first at Option 255 (see section 8.1.5). The fields in this menu cannot be changed. Entering 255 brings up
the following screen.
NAT
Prestige 1400 WAN Router with Integrated Ethernet Switch
This is the Address Mapping Set that you wish to apply to this node.
Set 255 is reserved for SUA.
Menu 15 – NAT Setup
1. Address Mapping Sets
2. Server Set

Figure 8-4 Menu 15 NAT Setup

Menu 15.1 - Address Mapping Sets
1. NAT_SET1
2. NAT_SET2
3. NAT_SET3
4. NAT_SET4
255. SUA (read only)

Figure 8-5 Menu 15.1 Address Mapping Sets

8-5