Table of Contents
Advertisement
You can choose up to four IP Policy sets (from twelve) by entering their numbers separated by commas, e.g., 2, 4,
7, 9.
Enter here to CONFIRM or ESC to CANCEL:
Press Space Bar to Toggle.
15.3.2 Remote Node Routing Policies
Go to Menu 11.3 and enter the number(s) of the IP Routing Policy set(s) as appropriate. You can cascade up to four
policy sets by entering their numbers separated by commas.
15.4
IP Policy Routing Example
If a network has both Internet and remote node connections, you can route Web packets to the Internet using one
policy and route FTP packets to a remote network using another policy. See the next figure.
15-5
Menu 3.2 - TCP/IP Ethernet Setup
TCP/IP Setup:
IP Address= 192.168.1.14
IP Subnet Mask= 255.255.255.0
RIP Direction= Both
Version= RIP-2B
Multicast = IGMP-v2
IP Policies= 2,4,7,9
Figure 15-4 Ethernet IP Policies
Menu 11.3 - Remote Node Network Layer Options
Rem IP Addr: 192.0.0.0
Rem Subnet Mask= 255.255.255.0
My WAN Addr= 192.0.0.0
Network Address Translation= Full Feature
Address Mapping Set= 2
Metric= 2
Private= No
RIP Direction= None
Version= RIP-1
Multicast= N/A
IP Policies= 1,3,5,8
Enter here to CONFIRM or ESC to CANCEL:
Figure 15-5 Remote Node Routing Policies
Prestige 1400 WAN Router with Integrated Ethernet Switch
Enter your
IP policy
sets here
Enter your
IP Policy
Sets here
IP Policy Routing
Advertisement
Table of Contents
Troubleshooting
