Figure 9-8 Menu 21.1.2 - Device Filter Rule; Table 9-5 Device Filter Rule Menu Fields - ZyXEL Communications PRESTIGE 1400 User Manual

Prestige 1400 WAN Router with Integrated Ethernet Switch
Press ENTER to Confirm or ESC to Cancel:
The following table describes the fields in the Device Filter Rule Menu.
FIELD
Filter #
Filter Type
Active
Offset
Length
Mask
Value
More
Log
9-10
Menu 21.1.1 - Device Filter Rule
Filter #: 1,1
Filter Type= Device Filter Rule
Active= No
Offset= 0
Length= 0
Mask= N/A
Value= N/A
More= No
Action Matched= Check Next Rule
Action Not Matched= Check Next Rule

Figure 9-8 Menu 21.1.2 - Device Filter Rule

Table 9-5 Device Filter Rule Menu Fields

DESCRIPTION
This is the filter set, filter rule co-ordinates, i.e., 2,3
refers to the second filter set and the third filter rule of
that set.
Press [SPACE BAR] to toggle between types of rules.
Parameters displayed below each type will be different.
Select Yes to turn on the filter rule.
Enter the starting byte of the data portion in the packet
that you wish to compare. The range for this field is
from 0 to 255.
Enter the byte count of the data portion in the packet
that you wish to compare. The range for this field is 0
to 8.
Enter the mask (in Hexadecimal) to apply to the data
portion before comparison.
Enter the value (in Hexadecimal) to compare with the
data portion.
If Yes, a matching packet is passed to the next filter
rule before an action is taken; else the packet is
disposed of according to the action fields.
If More is Yes, then Action Matched and Action Not
Matched will be N/A.
Select the logging option from the following:
None - No packets will be logged.
Action Matched - Only packets that match the rule
parameters will be logged.
Action Not Matched - Only packets that do not match
the rule parameters will be logged.
Log= None
OPTION
Device Filter
Rule /
TCP/IP Filter
Rule
Yes/No
0
(default)
0
(default)
Yes / N/A
None
Action
Matched
Action Not
Matched
Filter Configuration