Table of Contents
Advertisement
Prestige 153/153X WAN Bridge/Routers
Table 4-4.
Remote Node Profile Menu Fields for Leased Lines (continued)
Field
Backup Line Call Direction
Device Type
(*for backup line only)
Pri(mary) Backup Phone #
(*for backup line only)
Sec(ondary) Backup Phone #
(*for backup line only)
4-18
Description
When the backup function is enabled and if all links
(WAN Ports) in a leased line connections drop, your
Prestige will pick up an available dial-up WAN port to
trigger a backup connection.
l
If this parameter is set to [Both], your Prestige
can both place and receive calls to/from this
remote node.
l
Set this parameter to [None] to de-activate the
Backup Line function.
l
If set to Incoming, your Prestige will not place a
call to a remote node.
l
If set to Outgoing, your Prestige will drop any
call from a remote node.
Use the space bar to choose the following selections:
Modem / ISDN TA / X.25 PAD / 56K Modem.
Your Prestige will only select a free device of the
specified device type to place a call.
Enter the primary telephone number that your
Prestige will dial when the backup line function is
triggered.
Enter the secondary telephone number that your
Prestige will dial when the backup line function is
triggered.
Option
Press space bar
to toggle
[Both/None/Out
going/Incoming]
[Both]
(default)
[None]
[Incoming]
[Outgoing]
[Modem]
[ISDN TA]
[X25 PAD]
[56K Modem]
Remote Node Configuration
Advertisement
Table of Contents
