System Information; Figure 13-5 Menu 24.1.5 - Router Status; Figure 13-6 Menu 24. 2.1 - System Maintenance Information; Table 13-3 Fields In System Maintenance - ZyXEL Communications PRESTIGE 1400 User Manual

Prestige 1400 WAN Router with Integrated Ethernet Switch
Dest
192.168.1.0
default
Press Enter to Exit:
FIELD
Dest
FF
Len
Device
Gateway
Metric
Stat
Timer
Use
13.2

System Information

Select option 24 from the main menu to open Menu 24 - System Maintenance.
Step 1
From Menu 24, select option 2 then select the first option from Menu 24.2 to view Menu 24.2.1.
Step 2

Figure 13-6 Menu 24. 2.1 - System Maintenance Information

The following table describes the fields in this menu.
Name
Routing
13-4
FF Len Device
00 24 enet0
01 0 Idle

Figure 13-5 Menu 24.1.5 - Router Status

This is the destination IP address.
This is for ZyXEL internal debugging.
This is the length of the subnet mask (24 bits = 255.255.255.0).
This is the physical device. Enet0 is Ethernet.
This is the gateway IP address or the remote node name.
The metric represents the "cost" of transmission for routing
purposes. IP routing uses hop count as the measurement of
cost, with a minimum of 1 for directly connected networks.
This is the bitmap flags of the route status.
This is the time left to route expiry. "0" means there is no expiry
time, i.e., an infinite timeout.
This shows how many times the route has been used.
Menu 24.2.1 - System Maintenance - Information
Name: MyPrestige
Routing: IP
ZyNOS S/W Version: V3.20(X.01)b02
LAN :
Ethernet Address: 00:a0:c5:30:00:b0
IP Address: 192.168.250.1
IP Mask: 255.255.255.0

Table 13-3 Fields in System Maintenance

FIELD
Displays the system name of your Prestige. This
information can be modified in Menu 1 - General Setup.
Refers to the routing protocol enabled.
Gateway Metric
192.168.1.1 1
Scone 2
DESCRIPTION
Press ESC or RETURN to Exit:
DESCRIPTION
stat Timer
041b 0 0
002b 0 0
System Information and Maintenance
Use