Table 68 Dscp Setting - ZyXEL Communications MS-7206 User Manual

Modular ethernet switch system

Hide thumbs Also See for MS-7206:

Table of Contents

Chapter 33 Differentiated Services

The following table describes the labels in this screen.

Table 68 DSCP Setting

This is the DSCP classification identification number.

To set the IEEE802.1p priority mapping, select the priority level from the drop-down list box.

Click Apply to save your changes to the switch's run-time memory. The switch loses these

changes if it is turned off or loses power, so use the Save link on the top navigation panel to

save your changes to the non-volatile memory when you are done configuring.

Click Cancel to discard all changes and start configuring the screen again.

MS-7206 User's Guide