Mm-7201 Access And Login - ZyXEL Communications MS-7206 User Manual

Chapter 53 Troubleshooting

53.2 MM-7201 Access and Login

I forgot the IP address for the MM-7201.
1 The default IP address is 192.168.0.1.
2 Use the console port to log in to the MM-7201.
I forgot the password.
1 The default password is 1234.
2 If this does not work, you have to reset the device to its factory defaults. See
on page
I cannot see or access the Login screen in the web configurator.
1 Make sure you are using the correct IP address.
• The default IP address is 192.168.0.1.
• If you changed the IP address
• If you changed the IP address and have forgotten it, see the troubleshooting
suggestions for
2 Make sure the MM-7201 is inserted correctly, and make sure the LEDs are behaving as
expected. See
3 Make sure your Internet browser does not block pop-up windows and has JavaScripts
and Java enabled. See
4 Make sure your computer is in the same subnet as the MM-7201. (If you know that there
are routers between your computer and the MM-7201, skip this step.)
5 If you have configured more than one IP interface, make sure another administrator is
NOT logged into the web configurator on a different IP interface using the same account.
6 Try to access the MM-7201 using the console port. If you can access the MM-7201,
check the settings to find out why the MM-7201 does not respond to HTTP. Make sure
you have enabled web service access. If you have configured a secured client IP address,
your computer's IP address must match it. Refer to the chapter on access control for
details.
7 Reset the device to its factory defaults, and try to access the MM-7201 with the default
IP address. See
8 If the problem continues, contact the network administrator or vendor.
324
53.
(Section 10.2 on page
I forgot the IP address for the MM-7201.
Section 1.4 on page
Appendix C on page
Section 4.6 on page
73), use the new IP address.
35.
345.
53.
Section 4.6
MS-7206 User's Guide