ZyXEL Communications MS-7206 User Manual page 75

Modular ethernet switch system
Hide thumbs Also See for MS-7206:
Table of Contents

Advertisement

Table 12 IP Setup (continued)
LABEL
IP Address
IP Subnet
Mask
Default
Gateway
Apply
Cancel
IP Interface
IP Address
IP Subnet
Mask
VID
Add
Cancel
Index
IP Address
Subnet Mask
VID
Delete
Cancel
MS-7206 User's Guide
DESCRIPTION
Enter the out-of-band management IP address of your switch in dotted decimal
notation. For example, 192.168.0.1.
Enter the IP subnet mask of your switch in dotted decimal notation for example
255.255.255.0.
Enter the IP address of the default outgoing gateway in dotted decimal notation, for
example 192.168.0.254
Click Apply to save your changes to the switch's run-time memory. The switch loses
these changes if it is turned off or loses power, so use the Save link on the top
navigation panel to save your changes to the non-volatile memory when you are done
configuring.
Click Cancel to reset the fields to your previous configuration.
Use these fields to create or edit IP routing domains on the switch.
Enter the IP address of your switch in dotted decimal notation for example
192.168.1.1. This is the IP address of the switch in an IP routing domain.
Enter the IP subnet mask of an IP routing domain in dotted decimal notation. For
example, 255.255.255.0.
Enter the VLAN identification number to which an IP routing domain belongs.
Click Add to save your changes to the switch's run-time memory. The switch loses
these changes if it is turned off or loses power, so use the Save link on the top
navigation panel to save your changes to the non-volatile memory when you are done
configuring.
Click Cancel to reset the fields to your previous configuration.
This field displays the index number of an entry.
This field displays IP address of the switch in the IP domain.
This field displays the subnet mask of the switch in the IP domain.
This field displays the VLAN identification number of the IP domain on the switch.
Click Delete to remove the selected entry from the summary table.
Note: Deleting all IP subnets locks you out from the switch.
Click Cancel to clear the Delete check boxes.
Chapter 10 IP Setup
75

Advertisement

Table of Contents
loading

Table of Contents