Figure 64 Mvr Configuration Example; Figure 65 Mvr Configuration Example - ZyXEL Communications MS-7206 User Manual

Chapter 27 Multicast

Figure 64 MVR Configuration Example

To configure the MVR settings on the switch, create a multicast group in the MVR screen and
set the receiver and source ports.

Figure 65 MVR Configuration Example

To set the switch to forward the multicast group traffic to the subscribers, configure multicast
group settings in the Group Configuration screen. The following figure shows an example
where two multicast groups (News and Movie) are configured for the multicast VLAN 200.
153
MS-7206 User's Guide