ZyXEL Communications MS-7206 User Manual page 272

Chapter 46 Introducing Commands
Table 100 Command Summary: Configuration Mode (continued)
COMMAND
service- ftp <socket-
control number>
http <socket-
number> <timeout>
https <socket-
number>
icmp
snmp
ssh <socket-
number>
telnet <socket-
number>
shutdown slot <slot-list>
snmp-server [contact <system
contact>]
[location <system
location>]
get-community
<property>
set-community
<property>
trap-community
<property>
trap-destination
<ip>
spanning-
tree
<port-list>
<port-list> path-
cost <1-65535>
272
DESCRIPTION
Resets the network to use the
no primary-
default primary virtual gateway
virtual-ip
(interface IP address).
Sets the network to use the
no secondary-
default secondary virtual
virtual-ip
gateway (0.0.0.0).
Enables preemption mode.
preempt
Sets the primary VRRP virtual
primary-
gateway IP address.
virtual-ip <ip>
Sets the priority of the uplink-
priority <1-
gateway.
254>
Sets the secondary VRRP virtual
secondary-
gateway IP address.
virtual-ip <ip>
Allows FTP access on the
specified service port.
Allows HTTP access on the
specified service port and
defines the timeout period.
Allows HTTPS access on the
specified service port.
Allows ICMP management
packets.
Allows SNMP management.
Allows SSH access on the
specified service port.
Allows Telnet access on the
specified service port.
Turns off the power to the slot.
Sets the geographic location and
the name of the person in charge
of this switch.
Sets the get community.
Sets the set community.
Sets the trap community.
Sets the IP addresses of up to
four stations to send your SNMP
traps to.
Enables STP on the switch.
Enables STP on a specified port. 13
Sets the STP path cost for a
specified port.
PRIVILEG
E
13
13
13
13
13
13
13
13
13
13
13
13
13
13
13
13
13
13
13
13
13
MS-7206 User's Guide