ZyXEL Communications MS-7206 User Manual page 251

Table 98 Command Summary: User Mode (continued)
COMMAND
help
history
logout
ping <IP|host-name>
<IP|host-name> [vlan
<vlan-id>]
[size <0-1472>]
[-t]
help
show alarm-status
ip
hardware-monitor <C|F>
poe-status
power-source-status
system-information
version
version flash
ssh <1|2> <[user@]dest-ip>
[command </>]
traceroute <ip|host-name>
<ip|host-name>
[vlan <vlan-id>]
[ttl <1-255>]
[wait <1-60>]
[queries <1-10>]
help
MS-7206 User's Guide
Chapter 46 Introducing Commands
DESCRIPTION
Displays help information.
Displays a list of previously command(s) that you
have executed. The switch stores up to 256
commands in history.
Exits from the CLI.
Sends Ping request to an Ethernet device.
Sends Ping request to an Ethernet device in the
specified VLAN(s) with the specified parameters.
Displays command help information.
Displays current status of each alarm in the
system.
Displays IP related information.
Displays current hardware monitor information with
the specified temperature unit (Celsius C or
Fahrenheit F).
Displays information about Power over Ethernet
(PoE) availability and usage.
Displays the status of each power module in the
system.
Displays general system information.
Displays the firmware version that is currently
running in the system.
Displays the firmware version that will be loaded
the next time the system restarts.
Connects to an SSH server with the specified SSH
version and addition commands to be executed on
the server.
Determines the path a packet takes to a device.
Determines the path a packet takes to a device in a
VLAN.
Displays command help information.
PRIVILEG
E
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
251