Figure 113 Logins; Table 81 Logins - ZyXEL Communications MS-7206 User Manual

Figure 113 Logins

The following table describes the labels in this screen.

Table 81 Logins

LABEL
Administrator
Old Password
New Password
Retype to confirm
Edit Logins
User Name
Password
Retype to confirm
Apply
Cancel
MS-7206 User's Guide
DESCRIPTION
This is the default administrator account with the "admin" user name. Only the
administrator has read/write access. You cannot change the default
administrator user name.
Type the existing administrator password (1234 is the default password when
shipped).
Enter your new administrator password.
Retype your new administrator password for confirmation
You may configure passwords for up to four users. These users have read-only
access. You can give users higher privileges via the CLI. For more information
on assigning privileges see
Set a user name (up to 32 English keyboard characters long).
Enter your new user password.
Retype your new user password for confirmation
Click Apply to save your changes to the switch's run-time memory. The switch
loses these changes if it is turned off or loses power, so use the Save link on
the top navigation panel to save your changes to the non-volatile memory when
you are done configuring.
Click Cancel to reset the fields.
Chapter 37 Access Control
Chapter 46 on page 243.
211