Figure 74 Diffserv: Dscp Setting; Table 48 Diffserv: Dscp Setting - ZyXEL Communications ZyXEL Dimension ES-2048 User Manual

Figure 74 DiffServ: DSCP Setting

The following table describes the labels in this screen.

Table 48 DiffServ: DSCP Setting

LABEL DESCRIPTION
0 ... 63 This is the DSCP classification identification number.
To set the IEEE802.1p priority mapping, select the priority level from the drop-down list box.
Apply Click Apply to save your changes to the switch's run-time memory. The switch loses these
changes if it is turned off or loses power, so use the Save link on the top navigation panel to
save your changes to the non-volatile memory when you are done configuring.
Cancel Click Cancel to discard all changes and start configuring the screen again.
Chapter 22 DiffServ Code Point
ES-2048 User's Guide
167