Neurosoft Neuron-Spectrum-61 Technical Manual page 65

Error! Use the Home tab to apply Заголовок 1 to the text that you want to appear here.
4. Ask the patient to lie on a bench (in supine position) with minimal noise and body
movement (background HR). Start recording from the background test. In 5 minutes
the program will show the mark of switching to the standing position. Ask the patient
to stand up straight and hold this position until the test is over (6 minutes).
5. Remove the electrodes and breathing sensor from the patient, clean and disin-
fect them according to the instructions in the corresponding manual.
6. Recording stops automatically. The analysis of obtained results is performed au-
tomatically. Look through the data in graphs and tables and correct artifacts if neces-
sary.
7. Generate the report, put some comments and conclusion to it and print the re-
port.
65