Neurosoft Neuron-Spectrum-61 Technical Manual page 62

Neuron-Spectrum-61, 62, 63, 64, 65 (Technical Manual)
3.2.4 Cerebral Function Monitoring
The systems can be used to record, save and analyze an amplitude-integrated EEG.
The detailed information about performing CFM is described in the "Cerebral Function
Monitoring" guidelines included in the delivery set. To perform CFM make the follow-
ing the steps:
1. Prepare a patient's skin and position the required electrodes (see "Neuromonitor.
Electrode Placement Tips").
2. Check the electrode placement quality and perform the signal monitoring and ac-
quisition in accordance with section 3.2.1.
If CFM is performed, the user can monitor the skin-electrode impedance and elec-
trode placement quality. In the Neuron-Spectrum.NET software all obtained traces are
highlighted with different colors depending on the impedance quality: green – good
impedance, yellow – satisfactory impedance, red – poor impedance. If impedance is
poor, the software shall warn you about it by generating auditory and visual notifica-
tions (red
the Neuron-Spectrum.NET user manual).
Fig. 53.Obtained traices
3. Complete the acquisition, remove electrodes and sensors from the patient, per-
form the analysis of obtained results (Fig. 54), generate and print an exam report
(if necessary), and switch off the device in accordance with section 3.2.1.
62
text on the trace) (see the related section of