Neurosoft Neuron-Spectrum-61 Technical Manual page 39

Error! Use the Home tab to apply Заголовок 1 to the text that you want to appear here.
Fig. 23. Schematics of equipment placement when notebook PC is used
7. If the patient monitor is used for pattern stimulation, connect it to the electronic
unit of the system using the pattern-stimulator adapter or to the system unit using
the adapter for high-resolution pattern stimulator according to one of the variants
marked as A on the schematics (Fig. 21).
8. If the patient monitor is used for biofeedback testing, connect it directly to the sys-
tem unit according to the variant marked as B on the schematics (Fig. 21).
2.4.2 Software Installation
If you purchase the system together with computer, the equipment is delivered with
installed and configured software (Neuron-Spectrum.NET). If you purchase the sys-
tem separately, please install the software from the digital media (included in the de-
livery set) to your computer. Read the corresponding section of the user manual for
the software before you start installation.
If you have no digital media, please, fill in the form and send your request
for free software
https://neurosoft.com/en/index/software.
update to Neurosoft Service Center on
39