Installing The Printer Driver Using Ieee 1394; Printing Via Scsi Print - Ricoh CL2000 Operating Instructions Manual

Installing the Printer Driver Using IEEE 1394

This section gives basic instructions for installing the printer drivers using the IEEE 1394 interface. The
printer drivers can be installed from the provided CD-ROM.
Important
Make sure all other applications are closed and the computer is not currently printing prior to installation.

Printing via SCSI print

Printing using a SCSI print device with the optional IEEE 1394 interface board is possible under Win-
dows XP or Windows Server 2003.
Important
Do not connect new IEEE 1394 or USB devices to the computer or turn on another printer while in-
stalling the printer driver.
Before uninstalling the printer driver, be sure to disconnect the IEEE 1394 interface cable from the
computer.
"SCSI print" must be set to active from the control panel. For more information, see "IEEE 1394 Con-
figuration", Option Setup Guide.
Note
The printer cannot receive print data from more than one computer at the same time. If you send
data from your computer when data is being received from another, an error message may appear
on the computer display.
Operating Instructions Client Reference
116