Host Interface; Ip Over 1394 - Ricoh CL2000 Operating Instructions Manual

C C C C
Press { { { { Enter #} } } } .
The following message appears on
the panel display.

Host Interface:

I/O Buffer
D D D D
Press { { { { U U U U } } } } or { { { { T T T T } } } } to display "IEEE
1394 Setup".
Host Interface:
IEEE 1394 Setup
E E E E
Press { { { { Enter #} } } } .
The following message appears on
the panel display.
IEEE 1394 Setup:
IP Address1394
F F F F
Press { { { { U U U U } } } } or { { { { T T T T } } } } to display "IP
over 1394".
IEEE 1394 Setup:

IP over 1394

A Press { { { { Enter #} } } } .
B Press { { { { U U U U } } } } or { { { { T T T T } } } } to select ei-
ther "Active" or "Not Active".
C Press { { { { Enter #} } } } .
The display returns to the previ-
ous menu in a few seconds.
G G G G
Assign the IP address to the printer.
Do not overlap the IP address in
the same subnet or the same IP ad-
dress in the network setting.
Note
❒ To get the IP address for the
printer, contact your network
administrator.
A Press { { { { U U U U } } } } or { { { { T T T T } } } } until the fol-
lowing message appears.
ZHBS040E
IEEE 1394 Setup:
IP Address1394
B Press { { { { Enter #} } } } .
The current IP address appears
on the panel display.
IP Address1394:
000.000.000.000
C Press { { { { U U U U } } } } or { { { { T T T T } } } } to enter the
leftmost entry field of the IP
address.
IP Address1394:
192.000.000.000
D Press { { { { Enter #} } } } .
The pointer (k) moves to the
next entry field automatically.
IP Address1394:
192.02k.000.000
Note
❒ The value moves by 10 if { { { { U U U U } } } }
or { { { { T T T T } } } } is kept pressed.
❒ You can return the pointer
(k) to the previous (left) entry
field by pressing { { { { Escape} } } } .
❒ If you press { { { { Escape} } } } when
the pointer (k) is on the left-
most position, the selected IP
address is reset.
1394 Interface Unit Type 4510
1
22