Configuring Netbeui For Printing - Ricoh CL2000 Operating Instructions Manual

Configuring NetBEUI for Printing

This describes how to configure the network interface board and Windows NT 4.0 to use NetBEUI.
Preparation
To use NetBEUI, use the SmartDeviceMonitor for Client port.
Configuring the printer
Configure the printer to use NetBEUI.
• Check NetBEUI is set to active. (The factory default is active.)
Reference
For more information about how to make the above settings, see "Windows NT 4.0 Configuration",
Client Reference.
Operating Instructions Administrator Reference
57