Paper Recommendations - Ricoh CL2000 Operating Instructions Manual

Paper and Other Media
❖ ❖ ❖ ❖ Paper weight and number of sheets to be set
Tray 1
Bypass Tray
2
PAPER FEED UNIT Type 3000
*1
Confirm that the top of the stack is not higher than the limit mark inside the tray.

Paper Recommendations

Loading Paper
Important
❒ Do not use paper that is meant for an ink-jet printer, or it may stick to the fus-
ing unit and cause a paper misfeed.
❒ Set the paper as described below
• Tray 1: Print side facing up
• Paper Feed Unit: Print side facing up
• Bypass Tray: Print side facing down
❒ Print quality cannot be guaranteed if paper other than the ones recommended
is used. For more information about recommended paper, contact your sales
or service representative.
Storing Paper
• Paper should always be stored properly. Improperly stored paper might re-
sult in poor print quality, paper misfeeds, or printer damage. Recommenda-
tions are as follows:
• Avoid storing paper in humid areas.
• Avoid exposing paper to direct sunlight.
• Store on a flat surface.
• Keep paper in the package in which the paper came.
Types of Paper and Other Media
❖ ❖ ❖ ❖ Plain Paper
• Plain paper refers to paper up to 105 g/m
per heavier than 105 g/m
18
Supported paper weight
2
60 - 105 g/m (16 - 28 lb.
Bond)
2
60 - 165 g/m (16 - 90 lb.
Index)
2
60 - 105 g/m (16 - 28 lb.
Bond)
2
(28 lb. Bond). If you print on pa-
2
(28 lb. Bond), use the Bypass Tray.
Maximum number of
*1
sheets (plain paper)
2
530 (80 g/m , 20 lb. Bond)
2
100 (80 g/m , 20 lb. Bond)
2
530 (80 g/m , 20 lb. Bond)