Remote Maintenance By Telnet; Using Telnet - Ricoh CL2000 Operating Instructions Manual

Remote Maintenance by telnet

You can view the printer status and configure the Network Interface Board using telnet.
Note
You should specify a password so that only the network administrator, or a person having network
administrator privileges, can use remote maintenance.

Using telnet

The following is a sample procedure in using telnet.
Limitation
Only one person at a time can be logged on to do remote maintenance.
A A A A
Use the IP address or the host name of the printer to start telnet.
% telnet IP_address
Note
In order to use the host name instead of the IP address, you must write it to the "/etc/hosts" file.
B B B B
Type the password.
Note
The factory default is "password".
C C C C
Type a command.
Reference
For more information about telnet commands, see
Operating Instructions Administrator Reference
p.189 "Commands List".
187