Getting Printer Information Over The Network; Printer Current Status - Ricoh CL2000 Operating Instructions Manual

Getting Printer Information over the Network

Printer current status

You can check the printer's status using the telnet command.
telnet
Use the status command.
Messages
Add Toner: Cyan
Add Toner: Magenta
Add Toner: Yellow
Calibrating...
Color Regist Error
Energy Save Mode
Hardware Problem Black PCU
Hardware Problem Bypass Tray
Hardware Problem Color PCU
Hardware Problem DIMM
Hardware Problem Ethernet
Hardware Problem HDD
Hardware Problem IEEE1394
Hardware Problem NV-RAM
Operating Instructions
The toner cartridge is empty.
The toner cartridge is empty.
The toner cartridge is empty.
The printer is calibrating or the photoconductor unit is being supplied.
The color registration error has occurred.
The printer is in Energy Saver Mode.
The photoconductor unit is not set correctly.
An error has occurred in the Bypass Tray.
The photoconductor unit is not set correctly.
An error has occurred in the DIMM.
An error has occurred in the Ethernet interface.
An error has occurred in the optional Printer Hard Disk.
An error has occurred in the IEEE 1394 interface.
An error has occurred in the optional Account Enhance Unit.
Administrator Reference
Description
213