Printer Hard Disk Type 3000 - Ricoh CL2000 Operating Instructions Manual

Options

Printer Hard Disk Type 3000

R CAUTION:
1
• Do not touch the inside of the
controller board compartment. It
may cause a machine malfunc-
tion or a burn.
Important
❒ Before touching the Printer Hard
Disk, touch something metal to
discharge any static electricity.
Static electricity can damage the
Printer Hard Disk.
❒ Do not subject the Printer Hard
Disk to physical shocks.
A A A A
Check the contents of the package
for the following:
❖ ❖ ❖ ❖ Printer Hard Disk Type 3000
❖ ❖ ❖ ❖ Screw
B B B B
Turn off the power, and then un-
plug the power cable.
15
C C C C
Remove the two screws that fas-
ten the controller board on the
back of the printer.
The removed screws will be used
in step
board.
D D D D
While holding the handle, pull
out the controller board slowly.
ZHBPD010E
The Printer Hard Disk is to be in-
stalled to the position shown in the
illustration.
H
to fasten the controller
ZHBP080E
ZHBP020E
ZHBP160E