Macintosh Configuration; Mac Os; Installing The Printer Driver And Software - Ricoh CL2000 Operating Instructions Manual

5. Macintosh Configuration

This section describes how to configure Mac OS.
• If you are using Mac OS, see
• If you are using Mac OS X, see

Mac OS

This section describes how to configure Mac OS to use EtherTalk and USB. The following procedure
describes how to configure Mac OS 9.1. If you are not using Mac OS 9.1, see the manual that comes
with your version of the Mac OS for more information.
Limitation
For use with Mac OS 8.6 or later. (Mac OS X Classic environment is supported.)
For use with a Macintosh, Power PC is required.
Note
The PostScript 3 printer driver is stored in the following folder on the CD-ROM.
Mac OS 8 and 9:PS Driver:(language):Disk1

Installing the Printer Driver and Software

Preparation
If the AdobePS installation starts under Mac OS X, the desktop automatically changes to the Classic
environment. If you want to set a printer with Mac OS X, see
Installing the PostScript Printer Driver and PPD File
It is necessary to install a printer driver and a PPD file to print from a Macintosh.
Follow these steps to install a printer driver and a PPD file into a Macintosh using Mac OS 8.6 or later.
Operating Instructions
p.153 "Mac OS".
p.163 "Mac OS X".
Client Reference
p.163 "Mac OS X".
153