Network Interface Board Type 3000 - Ricoh CL2000 Operating Instructions Manual

Options

Network Interface Board Type 3000

R CAUTION:
1
• Do not touch the inside of the
controller board compartment. It
may cause a machine malfunc-
tion or a burn.
Important
❒ Before touching the Network In-
terface Board, touch something
metal to discharge any static elec-
tricity. Static electricity can dam-
age the Network Interface Board.
❒ Do not subject the Network Inter-
face Board Interface Unit to physi-
cal shocks.
A A A A
Check the contents of the package
for the following:
❖ ❖ ❖ ❖ Network Interface Board Type 3000
❖ ❖ ❖ ❖ Ferrite Core × × × × 2
35
B B B B
Turn off the power, and then un-
plug the power cable.
C C C C
Remove the two screws that fas-
ten the controller board on the
back of the printer.
The removed screws will be used
in step
board.
D D D D
While holding the handle, pull
out the controller board slowly.
ZHBP910E
ZHBP911E
K
to fasten the controller
ZHBPA080E
ZHBPA020E