Fusing Unit Type 155 - Ricoh CL2000 Operating Instructions Manual

Fusing Unit Type 155

R CAUTION:
• The inside of the machine be-
comes very hot. Do not touch the
parts with a "v" label (means
hot surface). Touching a part
with a "v" label (means hot sur-
face) could result in a burn.
• The fusing unit becomes very
hot. When installing the new fus-
ing unit, turn off the printer and
wait about 30 minutes. After that,
install the new fusing unit. Not
waiting for the unit to cool down
can result in a burn.
• Do not pull out the fusing unit
forcefully. It may cause the unit
to fall and result in an injury.
• When touching the fusing unit,
do not touch any areas other
than the handle as it may cause
a burn.
Replace the fusing unit when the fol-
lowing message appears on the panel
display.
Replace Fusing
Unit soon
or
Replace
Fusing Unit
Check the contents of the box for the
following items:
❖ ❖ ❖ ❖ Fusing Unit
❖ ❖ ❖ ❖ Transfer Roller
Important
❒ Be sure to make the setting from
the control panel after replacing
the fusing unit. Without it, the pro-
cedure is incomplete.
A A A A
Turn off the power.
Important
❒ To prevent a burn, after the
power is turned off, be sure to
wait about 30 minutes until the
fusing unit cools down before
touching the fusing unit.
Fusing Unit Type 155
ZHBH200E
ZHBH590E
39
3