Setting Spool Printing - Ricoh CL2000 Operating Instructions Manual

- Viewing/Deleting spool jobs in a Web browser -
- -
Launch the Web browser and enter the machine's IP address in the address bar. This displays the top
page.
Example :
http://192.168.0.10
(In this example, the IP address of the machine is 192.168.0.10)
Click "Admin Info", and then "Spool Printing Job List (Printer)" to display the spool jobs. To delete,
check the box next to the name of the file you want to delete. Enter the password
[Delete]. For more information, see
*1
The default password is "password".

- Setting Spool Printing

-
- -
Spool Printing can be set using telnet or a Web browser.
• Using a Web browser
Click "Configuration", and then "General". Set "Spool Printing"to "Enable".
• Using telnet
Enter "spoolsw spool on" to set Spool Printing.
Reference
For more information about how to set up the spool printing, see the Help file.
Operating Instructions
p.111 "Configuring the Network Interface Board
Administrator Reference
*1
, and then click
Settings".
186